Monthly Archives: December 2010

CISCO IOS NAT Load-Balancing for Two ISP Connections (route-map)

interface FastEthernet0 ip address dhcp ip nat outside ip virtual-reassembly ! interface FastEthernet1 no ip address pppoe enable no cdp enable ! interface FastEthernet2 no cdp enable ! ! interface Vlan1 description LAN Interface ip address 192.168.108.1 255.255.255.0 ip nat … Continue reading

Posted in Uncategorized | Tagged , , , | Leave a comment

Configuring dynamic NAT with route-maps

interface Ethernet0 ip address 10.1.1.1 255.0.0.0 ip nat inside !–This connects to the Corporate network, designated as the NAT inside interface. interface Serial0 ip address 192.168.1.1 255.255.255.252 ip nat outside !—This connects to the Internet through ISP-1, designated as the … Continue reading

Posted in Cisco | Tagged , , | Leave a comment

Enabling Static NAT Route Mapping Example

Enabling Static NAT Route Mapping Example The following example shows the use of route mapping with static NAT translations: interface Ethernet3 ip address 209.165.201.1 255.255.255.0 ip nat outside media-type 10BaseT ! interface Ethernet4 ip address 209.165.201.5 255.255.255.0 ip nat outside … Continue reading

Posted in Cisco | Tagged , | Leave a comment