Juniper – Deploying IP Telephony with EX2200 Ethernet Switches

EX2200 Ethernet Switches – Ethernet Solutions – Juniper Networks.
DownloadPDF Document]

user@switch# set protocols lldp interface all
user@switch# set protocols lldp-med interface all
user@switch# set vlans voip-only vlan-id 99
user@switch# set vlans data-only vlan-id 10
user@switch# set interfaces ge-0/0/1 unit 0 family ethernet-switching port-mode
access
user@switch# set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan member
data-only
user@switch# set ethernet-switching-options voip interface ge-0/0/1.0 vlan voiponly
user@switch# set ethernet-switching-options voip interface ge-0/0/1.0 forwardingclass
expedited-forwarding
user@switch# commit

VoIP Phones and End Hosts Sharing Ports
VoIP Phones with LLDP-MED Support
VoIP Phones with LLDP-MED Support—Vendor and Model List
Avaya LLDP-MED VoIP phone models:
Cisco Systems LLDP-MED VoIP phone models:
Nortel LLDP-MED VoIP phone models:
Phones without LLDP-MED Support.
Using Access Port with Voice VLAN Feature (but without LLDP-MED)
Using Access Port with the Same VLAN ID for Both Voice and Data
Using Trunk Port with Native-VLAN Option
Description and Deployment Scenario—Method 2: Separate Ports for
VoIP Phone and Endpoint Device
Assigning Each Port as Access Port for Different VLAN
Assigning Both Ports as Access Ports for Data VLAN with Voice VLAN Feature.

This entry was posted in Juniper. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s